Orders received before 3:00 p.m. (PST) Mondaythru Friday, will ship same dayDrop ship, pallet and special orders may ship next day
Item #: DD-TAE10
Order in increments of 10
Qty Available: 114572
Order in increments of 10 - Take Apart Flag Emitters can be pulled apart for easy cleaning. Attach to either 1/2" or 1/4" drip tubing. Excellent for low pressure, gravity fed drip systems. Output: 1 GPH.
Replacement forAgrifim TAE 10 SUPER-FLO 1 gph Emitter laminar flow take apart emitterAquarius Brands PNCE100 Flag Emitters w/ Locking CapDIG 06-009 Flag Drip Emitter 1 GPHDrip Depot 1280Dripworks DTA1Ewing 12003810Hit RPTAE 10 Super-Pro EmitterJain Irrigation PNCE100 Flag Emitters w/ Locking Cap MrDrip 1GPHFLAGOrbit DripMaster Flag Drippers Pepco PNCE100 Flag Emitters w/ Locking Cap Raindrip 121010B 121025B 1 GPH Flag Drippers Laminar flow take-apart designRaindrip Flag Dripper 1 GPHThe Drip Store D021Toro E-2 Classic Take Apart Emitter T-DBK04
Take Apart Emitter (1 GPH)
3 simple steps
Everything you need to know about Drip Irrigation Systems
A clean cut makes it easierSome drip irrigation hole punches are shaped like a pencil and simply poke a hole as they push through the drip irrigation tubing. They require more force and can slip off of the drip tubing before they make the hole. The Super Punch (shown here) has a squeeze handle and is only $9.90. A less expensive option is our Deluxe Hole Punch which has a sharp, circular cutting edge. This drip irrigation hole punch is comfortable, easy on your hands, and costs only $3.90.
1/4" Flow Control Valve inserts into micro tubingIf you installed a drip irrigation system to water hanging baskets or flower pots, put a 1/4" flow control valve on each pot. You can reduce the drip irrigation flow or shut it off completely.
How to Choose a Drip Regulator
Drip Irrigation Design and Installation Guide - Micro Drip Irrigation System Design part 1
Drip Irrigation Design and Installation Guide - Micro Drip Irrigation System Design (Part 1)
Drip Irrigation Design and Installation Guide - Micro Drip Irrigation System Design part 3
Sprinkler irrigation systems are commonly used in lawn irrigation systems and other planted areas where a spray or mist is desirable. For plants that require uniform coverage of water (grass, ground cover, seeds) a sprinkler irrigation system is appropriate.
If you are installing lawn sprinkler irrigation systems, Irrigation Direct carries a variety of supplies and parts like an adjustable nozzles for Rain Bird sprinkler heads. Our shrub adapters are perfect for garden sprinklers and shrub zones.
Combine pop-ups and rotors with electronic sprinkler controllers (timers), and inline valves to automate your landscape sprinkler irrigation system. Browse our Sprinkler System Supplies and Parts to find sprinkler nozzles, bubblers, swing assemblies, cut-off risers, Marlex 90s, and more.
Drip irrigation is a watering method which delivers water to plants slowly and right where they need it at the roots. Where typical pop-up sprinklers spray water into the air and onto plants, drip irrigation systems combine flexible poly drip tubing and drip emitters or "drippers" to both conserve water and save money.
Drip irrigation systems are not affected by wind and will greatly reduce evaporation and runoff common with traditional irrigation systems. Drip irrigation is the perfect solution for raised vegetable garden beds, hanging baskets, and potted plants.
Learn how to plan, design, and install your own Drip Irrigation System with our FREE online Drip Irrigation Tutorials.