In observance of Memorial Day, we will be closed on Monday, May 27th, 2013. All Website orders placed after 3pm (PST) Friday May 24th to Sunday May 26th 11:59pm (PST) will ship on Tuesday May 27th. Orders placed after 12:00am (PST) Monday May 27th, will ship Wednesday May 28th. Thank you.
Product Description
1" Plastic Electric Anti-Siphon Valve w/ Flow Control
HRA Series Model HRA-100-FF-FC
HRA Series
Reliable, tough and easy to use — Hydro-rain's HRA valve has it all. Anti-siphon valves that prevent drinking water from being contaminated by irrigation backflow must be dependable. They must also be rugged enough to provide continuing protection even in punishing environments. In areas where backflow prevention is required, Hydro- Rain’s HRA Anti-Siphon Valve is a “must have". HRA valve meets ASSE, CSA and IAPMO standards.
- Automatic valve—For convenience and water savings when used with 24-volt irrigation controllers
- Anti-siphon design—Integrated anti-siphon vacuum breaker design does not allow water downstream of the valve to siphon back into the main water source (meets ASSE, CSA and IAPMO standards)
- Rugged—Double seal TPR diaphragm ensures years of reliable performance
- Stainless steel metering system—Provides a continual cleaning action every time the valve goes on or off
- Commercial grade construction—PVC body for long life and heavy-duty performance
- Leak proof—Buna-N valve seat seal provides positive closure preventing seepage
- Flow control—Meets the needs of your landscape and environmental conditions by “tuning in” sprinkler water droplet size
- Manual internal bleed—Allows manual watering with no external discharge
- HRC 900 Adaptabilty—Combines HRA 075/100 with HRC 900 isolation controller module and to run 1–4 valves in remote location
- Box Qty: 12
- Do not use pipe dope for installation, use teflon tape only.
Product Details
OPERATING RANGE
- Flow: 0.25 to 30 GPM (1 to 115 LPM)
- Pressure Range: 10 to 150 PSI (0,7 to 10 Bar)
- Dimensions:
- Height: 6" (15,2 cm)
- Length: HRA 075—6 1/2" (16,5 cm) / HRA 100— 7" (17,7 cm)
- Width: 3" (7,6 cm)
- Footprint: HRA 075—4" (10,1 cm) / HRA 100— 4 3/8" (10,9 cm)
OPERATING RANGE
- 24 VAC 50/60 (Cycle/Sec) Solenoid
- Inrush current: .30 A (7.2 VA) at 60 HZ
- Holding current: .19A (4.6VA) at 60 HZ
- Coil Resistance: 42 to 55 OHMS
Do not use pipe dope for installation, use teflon tape only.
