CPVC 45º Elbows Sch 80

Schedule 80 45 degree PVC Elbows turn the direction of flow in a PVC pipe system at a 45 degree angle. Ideal for customizing a layout to fit in an existing space or when a slight bend is needed in PVC pipe. CPVC (Chlorinated polyvinyl chloride) is similar to PVC but the addition of chlorine reduces the reaction to heat and corrosive damage and allows the fitting to retain its mechanical strength. Available in sizes 1/4" through 8".

Available in Slip 45 CPVC Elbows and Threaded 45 degree Pipe Fitting Elbows.

     *PVC primer and glue are required for all slip PVC connections   

     *Teflon tape required for all threaded PVC connections

The term “Schedule 80” refers to the strength and thickness of the PVC pipe or PVC fitting and how much pressure it can hold. CPVC Schedule 80 fittings are designed to handle water pressures of 300 psi and water temperatures up to 200 degrees and are usually use in projects that support higher pressures. Meets NSF and ASTM F-437 and F-439 requirements. Manufactured from CPVC 23447-B Gray.