Micro Spray 18" Rigid Riser with 1/4" Barb Adapter

Product Description

Rigid Riser with barbed connectors are used with drip micro sprayers and clip stake to create an adjustable micro spray stake assembly. They are available in lengths of 8", 12", and 18".

Product Details

• Overall Length 8"
• Pre Installed 1/4" barb adapter
• Easily extend the height of micro stake assembly as plants grow
• Attaches to 1/2" solid drip tubing main line with 1/4" solid micro tubing.
• All 10-32 threaded fittings can be used with this item (Micro Sprayers, Adjustable Emitters & Spectrum Sprayers.)

Product Details

• Overall Length 8"
• Pre Installed 1/4" barb adapter
• Easily extend the height of micro stake assembly as plants grow
• Attaches to 1/2" solid drip tubing main line with 1/4" solid micro tubing.
• All 10-32 threaded fittings can be used with this item (Micro Sprayers, Adjustable Emitters & Spectrum Sprayers.)

Related Tutorials

• Installing Micro Spray Caps with a Nut Driver
    Use a 5/16" nut driver

FAQ

How do I determine my water flow rate?

The flow rate is the amount of water flowing through your water supply line. Since drip emitters and micro sprays consume x gallons per hour, it is important to know the flow rate available to feed your emitters. It is measured in gallons per hour (GPH). To determine the flow rate out of your faucet (hose bibb, spigot, hydrant), read our tutorial on Determing Your Flow Rate.

How do I choose a pressure regulator?

Drip irrigation systems are designed to operate between 20 and 30 psi. Most household water systems are set between 50-70 psi (or higher). A pressure regulator is required to reduce the household water pressure down to the proper range for drip systems. When choosing between a 20 psi and 30 psi regulator, here are some guidelines:

• Non pressure-compensating emitters:  Use 20 psi regulator.
• Fogger mister bubblers: Use a 45 psi regulator.
• Hanging Baskets: Use a 30 psi regulator
• Drip Tape: Use a 10 psi regulator

When using micro sprays and bubblers be sure to consult the water output charts for each product as flow rates very with pressure. For more details, read our tutorial: How to Choose a Drip Regulator. 

Can I combine emitters (drippers) and micro sprays on the same line?

You can combine drip emitters, adjustable drip sprayers, and drip micro sprays all on the same poly tubing (mainline) as long as your total gallon output does not exceed the flow rate available. Drip sprayers can use in excess of 30 gallons per hour so keep track of your water output when designing your drip system. For more details, check out these tutorials:

 

Choosing The Right Drip Emitter

How Many Emitters Can I Put On a Mainline?.