Product Description

Contains everything you will need to go from hose bibb (faucet) to plants. Waters up to 20 roses or tomatoes with Adjustable Stream Bubblers on spikes. The number of plants that can be watered with each kit is an estimate based on the number of drip emitters in the kit. If you want to automate your drip system, a Hose End Timer (DD-HEDT) can be purchased separately.

Maximum Flow Rate Required when kit is fully installed (all emitters): 100-200 gph (Emitters are adjustable. Flow rate will vary).

Need more of a particular item? Click the KIT PARTS tab above to add them to your cart.

Included in the Kit:

	Qty	Item	Part #
	1	Y Filter 3/4" Female Hose Swivel x Male Hose 150 Mesh Stainless Steel Screen	DD-YS75HFM
	1	Pressure Regulator 30 PSI - Hose Threaded 3/4" FHT x 3/4" MHT - Economy Model	DD-HPR30
	1	Direct-Loc Swivel Adapter .600 ID DL x 3/4" FHT Swivel - 700 or 710 Tubing	DL-FHS600
	1	Direct-Loc Elbow .600 ID DL x DL - 700 or 710 Tubing	DL-L600
	3	Direct-Loc Tee .600 ID - 700 or 710 Tubing	DL-T600
	1	Direct-Loc Coupling .600" ID - 700 or 710 Tubing	DL-C600
	4	Figure 8 End of Line Plug - 1/2" .620" .700" .710" Tubing	DD-F8
	1	1/2" x 100' .700 OD Poly Tubing - 100' Roll	DD-DH700-100
	1	1/4" x 100' Poly Micro Tubing (PE) - 100' Roll	DD-DH250-100
	1	Deluxe Hole Punch for 1/4" Barbed Fittings & Drippers	DD-HP250
	20	Adjustable Full Circle Stream Spray Bubbler on 6" Stake for Drip Irrigation	DD-SR360S
	10	Drip Tubing Hold Down 8" Wire Stake "J Style" fits 1/8" to 3/4" tubing	DD-S8
	10	Goof Plug - Dual End 1/4" & 1/8"	DD-GP

Drip Irrigation Kit Installation Manual

Drip Irrigation Kit for Roses & Tomatoes

Model:
Roses & Tomatoes Kit: 20 Roses/Tomatoes (DK-RTS)

Description

This kit contains everything you will need to go from hose bibb (faucet) to plants. It will water up to 20 roses or tomatoes with Adjustable Stream Bubblers on spikes. The number of plants that can be watered with each kit is an estimate based on the number of stream bubblers in the kit. If you want to automate your drip system, a Hose End Timer (DD-HEDT) can be purchased separately.

Maximum Flow Rate Required when kit is fully installed (all emitters): 100-200 gph (emitters are adjustable).  

Installation: Overview

You will attach a Filter, and Pressure Regulator to the faucet or garden hose. The supply line is 1/2” Solid Drip Tubing and is installed close to the roses/tomatoes. You will use 1/4” solid micro tubing and an adjustable stream spray bubbler on a spike to water the plants. The 1/2” tubing is capped off with a Figure 8.

Installation: Step-by-Step

Roll the tubing out in the sun to soften. Weigh it down and let the sun heat the tubing. This will make it easier to work with.

Step one: Connecting to the Hose Bibb

1. Screw the Filter (DD-YS75HFM) onto the hose bibb. Note: If you have purchased an optional Hose End Timer (DD-HEDT) screw it onto the hose bibb first. Then attach the Filter to the Hose End Timer.
2. Screw the Regulator (DD-HPR30) onto the Filter.
3. Screw the Direct-Loc Swivel Adapter (DL-FHS600) onto the regulator.

Step Two: From the Hose Bibb to the Roses/Tomatoes

1. Attach 1/2” Drip Tubing (DD-DH700) to the 1/2” swivel adapter and run it along the plants.
2. Use 1/2” Direct-Loc Elbows (DL-L600) to make 90 degree turns as needed. It is best to run the tubing as close to the plants as possible.
3. Use Direct-Loc Couplers (DD-C600) to connect sections of 1/2" solid drip tubing or for repairs in 1/2” tubing that goof plugs can’t handle.  
4. Use Direct-Loc Tees (DD-T600) to branch off of 1/2” mainline drip tubing for lateral lines.  
5. Stake the tubing in place loosely with Wire Stakes (DD-S8).
6. Turn on the water and FLUSH THE LINE until all lines are clear of debris.
7. Install the Figure 8 End Line Plugs (DD-F8) at the end of the drip tubing. Just slide one hole onto the end of the tubing, bend the tubing back, and slide the other hole over the end of the tube.

Step Three: Installing Adjustable Stream Bubblers

Adjustable stream bubblers apply “fingers” of water and come with an attached 1/4” transfer barb which connects to the 1/2” main line drip tubing. Since they are adjustable, it is easy to “dial in” the correct amount of water required for each plant.  

1. Poke a hole into the solid tubing with the Deluxe Hole Punch (DD-HP250) near each plant.
2. Twist off the transfer barb from the stream bubbler and insert it into the hole.
3. Cut a length of 1/4” solid micro tubing (DD-DH250) to run from the 1/2” solid drip tubing to the plant.
4. Push the 1/4” micro tubing over the other end of the transfer barb.
5. Attach the other end of the 1/4” tubing to the barb on the Adjustable Stream Bubbler (DD-SR360S)
6. Push the 6” spike of the stream bubbler into the soil near the plant.
7. Once all of the adjustable stream bubblers are attached turn on your system and check for water output.  Adjust flow rates by turning the top of the adjustable stream bubblers to that all plants receive the water they need during the same time period.

Maintenance Tips

WINTERIZING

If you live where it freezes, it is a good idea to drain the water from your drip lines and the components connected to the water source. Here’s how:

1. Turn off the hose bibb.
2. If you have a hose-end timer installed, let the system run through a watering cycle. This will open the timer and let any remaining water drain out of the timer and other components & into the drip tubing.
3. If you do not have a timer installed, unscrew the drip system from the hose bibb for a few minutes to let air into the line. Reattach the line after a minute or two.  
4. Note: We do not recommend blowing compressed air though a drip system.

FLUSH THE LINE ANUALLY

Since drip systems operate at low pressures, sediment can settle in the line over time.

1. Flush the line annually by unscrewing the end cap at the end of the line.
2. Check filter screen for debris and clean if necessary.
3. Turn on the hose bibb until the water runs clear from the end of the line.
4. Replace the cap.
5. Turn on the hose bibb and check the entire system for leaks.

REPAIR BREAKS & LEAKS

1. Small holes in the line can be plugged with a goof plug.
2. For larger breaks or holes in the 1/4” drip tubing, make a clean cut around the damaged area and reconnect the lines with a 1/4” barbed connector (DD-C250).
3. For larger breaks or holes in the 1/2” drip tubing, make a clean cut around the damaged area and reconnect the lines with a 1/2” Direct-Loc coupling (DL-C600).

DRIP IRRIGATION TUTORIALS

Visit our website for more tips, tricks, and expert advice: http://www.irrigationdirect.com/expert-advice

Irrigation Direct Limited Warranty

Irrigation Direct warrants to the original purchaser that the Irrigation Direct Product(s) is/are free from defects in material and workmanship under normal use and service. The warranty coverage lasts for a period of three (3) years starting from the date of purchase. For details visit our warranty page.  

The Irrigation Direct Guarantee

Our 100% satisfaction guarantee ensures that every item you purchase at Irrigation Direct meets your high standards—or you can return it for a replacement or refund. We want you to buy with confidence anytime you purchase products on the Irrigation Direct website. If you're ever dissatisfied with an item, contact us to return or exchange it.

Product Details

• Waters up to 20 roses/tomatoes
• Connects to a hose bibb (faucet, spigot): All componets included.
• 20 Adjustable Stream Bubblers (full circle)
• Includes Deluxe Hole Punch
• Y Filter with stainles steel screen
• 100 feet of 1/2" solid tubing
• Direct-Loc elbows, tees, couplers, & swivel adapter are removable and reusable
• Need more of a particular item? Click the KIT PARTS tab above to add them to your cart.

All of the items below are included in the kit. If you need more of any particular item, you can add them to your cart from the list below.

(note: the quantities above are not the same as the quantities included in the kit, see the "overview" tab to see the quantities that are already included)