Product Description

Great for converting existing sprinkler systems to drip irrigation products. Up to 6 outlets available. Ships with one outlet open. Cut the tip off of outlets as you need them. Not sure which type of emitter to buy? Compare all drip emitters.

Product Details

• Adjustable from 1 to 6 - 1/4" (.250) outlets, comes with one outlet open
• Easily open additional outlets with utility knife (see Expert Advice Tab)
• Recommended Operating Pressure: 10 - 40 PSI
• Screen included
• Each outlet will put out 6 GPH (gallons per hour)
• To install unit on its side simply use a 1/2" marlex elbow
• Due to tubing softness, it is not recommended to use 1/4" Poly Vinyl tubing (PVC). Use 1/4" PolyEthylene tubing (PE) instead.

Installation Tip:

Use a utility knife to open bubbler outlets 

  Use only the outlets you need.  

STEP ONE: Cut off the outlet tip.

It may be safer to screw the bubbler onto a 1/2" threaded riser for cutting.

1. Hold the bubbler against a hard surface and away from your body.

2. Place the blade against the outlet that you want to open.

3. Wiggle the blade back-and-forth while applying firm pressure.

STEP TWO: The tip of the outlet will cut off cleanly and is now ready for 1/4" drip tubing. 

Product Details

• Adjustable from 1 to 6 - 1/4" (.250) outlets, comes with one outlet open
• Easily open additional outlets with utility knife (see Expert Advice Tab)
• Recommended Operating Pressure: 10 - 40 PSI
• Screen included
• Each outlet will put out 6 GPH (gallons per hour)
• To install unit on its side simply use a 1/2" marlex elbow
• Due to tubing softness, it is not recommended to use 1/4" Poly Vinyl tubing (PVC). Use 1/4" PolyEthylene tubing (PE) instead.

Compare all drip emitters.

Replacement for

Agrifim CF 6 Cuatro-Flo Bubbler, , Drip Depot 1143, , Hit RPCFL 6 Raindrip Multiplex Bubbler, ,