Micro Spray Adapter 1/2" Female Pipe Thread x 10-32 Female Thread

Product Description

Convert a 1/2" threaded riser to drip micro spray. Good for sprinkler-to-drip retrofit projects. 

Product Details

• Inlet: 1/2"  Female Pipe Thread
• Outlet: 10-32 NFT (Nominal Female Thread)
• Installs on any 1/2" male pipe threaded riser
• The following micro spray products will thread into the top of the Micro Spray Adapter:

• Variable Adjust Micro Spray - Full Circle
• Variable Adjust Micro Spray - 1/2 Circle
• Variable Adjust Micro Spray - 1/4 Circle
• Adjustable Stream Bubbler - Full Circle 
• Adjustable Stream Bubbler - 1/2 Circle
• Adjustable Spectrum Spray - Full Circle 
• Adjustable Rotary Spray - Full Circle
• Micro Spray Threaded Bases and Caps

Micro Spray Adapter

Option 2 - Micro Jet Sprayers

Replace sprinklers with drip micro spray fittings. Swap out the sprinkler with a micro spray adapter. The adapter will accept threaded micro spray fittings.

The adapter threads directly onto a 1/2" riser. Micro jet fittings thread into the top.

Micro Jet/Spray fittings operate best between 10 psi - 30 psi. Check your water pressure before installing. If your pressure is 30 psi or less, you are good to go. If not, you will need to install a pressure regulator.

These spray fittings come in a variety of configurations from fixed patterns and outputs to adjustable spray and stream options. Click on any of the micro sprays below for product details.

Micro Spray Adapter Threads onto 1/2" Riser

Micro Sprays Thread into Adapter

One-Piece Micro Spray / Adjustable Stream Spray / Adjustable Micro Spray / Adjustable Rotary Spray

Product Details

• Inlet: 1/2"  Female Pipe Thread
• Outlet: 10-32 NFT (Nominal Female Thread)
• Installs on any 1/2" male pipe threaded riser
• The following 10-32 threaded micro spray products will screw into this part:
  • Variable Adjust Micro Spray - Half Circle 
  • Variable Adjust Micro Spray - Full Circle 
  • Adjustable Stream Bubbler - Full Circle 
  • Adjustable Spectrum Spray - Full Circle 
  • Adjustable Rotary Spray - Full Circle

Replacement for

Ag Products SAT-2010-01, , Agrifim SAJ, , Aquarius Brands SAT-2010-01, , DIG 16-034 Shrub Adapter, , Ewing 12002100, , Jain Irrigation SAT-2010-01, , MrDrip 2411, , Orbit DripMaster 67056, , Pepco SAT-2010-01, , Salco SLV-41015, , The Drip Store A129, , Weathermatic SLV-41015, ,

Related Tutorials

• Connecting to the Water Source
    Hose Bibb vs. Electric Solenoid Valve
• Home Drip Irrigation System Design and Installation Guide - Micro Irrigation Systems
    Everything you need to know about Drip Irrigation Systems
• Retrofitting Sprinklers for Drip Irrigation

Tips & Tricks

Use Teflon tape on pipe threads

For a water-tight seal

Always use Teflon tape with pipe-threaded fittings. Wrap Teflon tape clockwise 4 - 5 times around pipe threads. Hose-thread fittings use a hose washer to make a water-tight seal.

Hose Thread

Officially called "Garden Hose Thread" (GHT), hose threads are found on garden hoses and many irrigation parts and adapter fittings. Generally referred to as "3/4" hose threads" the outer diameter is 1.0625 inches and has a pitch of 11.5 tpi (threads per inch). Hose threads are NOT the same as pipe threads and should never be screwed into pipe threaded fittings.   

Male hose threads are found on the outside of a fitting and thread into female hose threads.

Female hose threads are found on the inside of a fitting and accept male hose threads.

Hose threads do not require Teflon tape or pipe dope (like pipe threads), just a hose washer. If you find a water leak with hose threads, it is most likely a worn hose washer. It may be time to replace it. Hose washers are found inside fittings with female hose threads. See also Pipe Thread, Adapter, Swivel, Hose Washer, Teflon Tape

Pipe Thread

The common term for National Pipe Thread (NPT). Pipe threads require Teflon tape or pipe dope to create a water-tight seal. Do not thread together pipe threads and hose threads. See also Teflon Tape, Pipe Dope, Hose Thread.

Teflon Tape

A non-adhesive tape (made of Teflon non-stick material) that is used to create a water-tight seal with pipe threaded fittings. It is tightly wrapped in a clockwise motion 3-4 times around the male pipe threads. Male and female fittings are then threaded together.

Hose Washer

Rubber gasket found inside fittings with female hose threads that makes a water-tight seal. See also Hose Thread.

View our complete glossary of irrigation terms.