Drip Irrigation Barbed Fittings - 1/4"
1/4” Barbed Connectors: aka Micro Connectors, Barbed Fittings: Drip irrigation barbed micro connectors are used to make connections
between 1/4” drip irrigation micro tubing or to connect 1/4" drip irrigation micro tubing and 1/4" soaker hose irrigation dripline to 1/2" or 3/4" drip irrigation poly tubing. Made with High Quality Plastic with Maximum UV Protection (Polypropylene), 1/4" barbed fittings will last 7 years in direct sunlight and more if it is mulched over.
1/4" barbed fittings are available in several configurations to give you the most flexibility in the installation and layout of 1/4" micro tubing. Use with a Hole Punch to attach to 1/2" or 3/4” solid drip irrigation tubing. No glue or lubricants are required.
When removing or repairing 1/4" barbed connections in 1/2" or 3/4" drip tubing, use a goof plug.
11 Item(s)
List Grid
-
Part #:
DD-C250 1/4" Barbed Connector
$0.04 - $0.09Volume discounts 1 - 49 $0.09 50 - 99 $0.07 100 - 999 $0.05 1000 + $0.04 Order in Multiples of 10 - Used with drip irrigation to connect 1/4" drip irrigation micro tubing or 1/4" soaker hose dripline to 1/2" or 3/4" drip poly tubing.
-
Part #:
DD-L250 1/4" Barbed Elbow
$0.04 - $0.10Volume discounts 1 - 49 $0.10 50 - 99 $0.07 100 - 999 $0.05 1000 + $0.04 Order in Multiples of 10 - Make 90 degree turns with 1/4" drip irrigation micro tubing. Is also inserted into 1/2" mainline drip irrigation poly tubing. Excellent for use in garden boxes, hanging baskets, and flower pots.
-
Part #:
DD-T250 1/4" Barbed Tee
$0.05 - $0.10Volume discounts 1 - 49 $0.10 50 - 99 $0.08 100 - 999 $0.06 1000 + $0.05 Order in Multiples of 10 - Used to connect 1/4" drip irrigation micro tubing or inserted into 1/2" drip irrigation poly tubing. Excellent for use in garden boxes, hanging baskets, and flower pots.
-
Part #:
DD-CS250 1/4" Barbed Cross
$0.17Order in Multiples of 10 - Used with drip irrigation to connect 1/4" drip irrigation micro tubing in four directions. It can also be inserted into mainline drip poly tubing.
-
Part #:
DD-FCV250 1/4" Barbed In-line Flow Control Valve
$0.25 - $0.60Volume discounts 1 - 24 $0.60 25 - 99 $0.50 100 - 999 $0.35 1000 + $0.25 Order in Multiples of 5 - Control or shut-off water supply in 1/4" drip irrigation micro tubing. Flow Control Valve easily inserts into 1/4" micro tubing.
-
Part #:
DD-GP Goof Plug - Dual End 1/4" & 1/8"
$0.02 - $0.06Volume discounts 1 - 49 $0.06 50 - 99 $0.05 100 - 999 $0.04 1000 - 9999 $0.03 10000 + $0.02 Order in Multiples of 10 - Plug holes in 1/2" drip irrigation poly tubing or cap off 1/4" micro tubing. Dual plug ends to accommodate large or small holes.
-
Part #:
DD-BP250 1/4" Bug Plug for 1/4" Micro Tubing
$0.04 - $0.08Volume discounts 1 - 49 $0.08 50 - 199 $0.07 200 - 999 $0.06 1000 + $0.04 Order in Multiples of 10 - Installed on the end of 1/4" drip tubing. Lets water out and keeps insects from entering and clogging the tubing. Also called an "Insect Plug"
-
Part #:
DD-HP250 Deluxe Hole Punch for 1/4" Barbed Fittings & Drippers
$2.25 - $3.90Volume discounts 1 - 4 $3.90 5 - 24 $3.30 25 - 99 $2.70 100 + $2.25 Fits very comfortably in your hand, this hole punch is constructed of heavy duty plastic & creates clean, precise holes in 1/2" drip irrigation poly tubing for 1/4" micro tubing fittings and emitters. -
Part #:
DD-MJRA-TB Micro Spray 1/4" Barb x 10-32 Adapter for MJRB
$0.15Order in multiples of 10 - This fitting is 1/4" Barb x 10-32 Threaded Adapter, it is installed on our DD-MJRB8
-
Part #:
DD-MJRA-TT Micro Spray Threaded Adapter 10-32 x 10-32 for MJRE
$0.15Order in multiples of 10 - Micro Spray Threaded Adapter 10-32 Thread x 10-32 Thread, this part comes installed on our DD-MJRE8, DD-MJRE12 & DD-MJRE18
-
Part #:
DD-CHS250 3/4" Hose Thread Swivel x 1/4" Barbed Adapter
$0.40 - $0.75Volume discounts 1 - 9 $0.75 10 - 24 $0.60 25 - 99 $0.50 100 + $0.40 Connects 1/4" drip tubing to faucet, spigot, hose bibb. Connects to 3/4" male hose threads. Perfect for small grouping of pots near a faucet. Screws onto a drip regulator.
11 Item(s)
List Grid
