Direct-Loc End Cap .600 ID DL x 3/4" MHT w/ Cap - 700 or 710 Tubing

Product Description

Also known as “Easy Loc”, “Perma Loc”, “Spin-Loc”, or “Power-Loc” our Direct-Loc fittings are used with drip irrigation. They twist onto 1/2" drip poly tubing and are reusable. They fit both 1/2" .700 OD Poly Tubing & 1/2" .710 OD Poly Tubing. Removable fittings make it easy to reconfigure your drip system if your needs or landscape designs change. Best fittings for winterizing your drip system – unscrew fittings and store tubing away for winter. No glue or Teflon tape required.

The Direct-Loc End Cap attaches to the end of 1/2" .700 OD Poly Tubing & 1/2" .710 OD Poly Tubing. The cap unscrews for easy flushing and draining for winter. 

We also carry 700 Compression End Caps, 710 Compression End Caps & Figure 8s.

Product Details

• Direct-Loc End Cap
• Fits both 1/2" .700 OD Poly Tubing & 1/2" .710 OD Poly Tubing
• Reusable – Just unscrew
• Quick & Easy Installation & Removal
• High Quality Plastic with Maximum UV Protection
• Recommended Operating Pressure: 10 to 30 PSI
• Maximum Operating Pressure: 70 PSI
• Allowable Tubing Wall Thickness: .025” -.050”
• Allowable Tubing Inside Diameter: .590” - .630”
• We also carry 700 Compression End Caps, 710 Compression End Caps & Figure 8s.

Replacement for

Acu-Drip Acu-Endcap F490, Ag Products Power-Loc PL-60-PETC, Ag Products Spin-Loc 565-SETC, Aquarius Brands Power-Loc PL-60-PETC, Aquarius Brands Spin-Loc 565-SETC, Drip Depot 1199, Dripworks Easy Loc ELMC, Irritec A1-H6CAP, Jain Irrigation Power-Loc PL-60-PETC, Jain Irrigation Spin-Loc 565-SETC, Point Source Irrigation Perma-Loc 31-H6CAP