Direct-Loc DL Tee x 3/4" PVC Slip

Product Description

Also known as “Easy Loc”, “Perma Loc”, “Spin-Loc”, or “Power-Loc” our Direct-Loc fittings are used with drip irrigation. They twist onto 1/2" drip poly tubing and are reusable. They fit both 1/2" .700 OD Poly Tubing & 1/2" .710 OD Poly Tubing. Removable fittings make it easy to reconfigure your drip system if your needs or landscape designs change. Best fittings for winterizing your drip system – unscrew fittings and store tubing away for winter. No glue or Teflon tape required.

Direct-Loc Slip Tees allow you to convert PVC fittings to Direct Loc tees. The adapter fitting is glued into a 3/4" PVC elbow, coupling, or tee and converts it to a Direct-Loc tee for use with 1/2" .700 OD Poly Tubing & 1/2" .710 OD Poly Tubing.

Great for sprinkler-to-drip retrofit projects. Install a drip regulator and filter near your sprinkler system valve. Connect it to the existing PVC pipe. Cap off sprinklers and add Direct-Loc adapters to your existing PCV pipe out in the field. Run drip mainline from there.

Product Details

• Direct-Loc Tee with 3/4" Slip
• Fits both 1/2" .700 OD Poly Tubing & 1/2" .710 OD Poly Tubing
• Reusable – Just unscrew Direct Loc ends
• Quick & Easy Installation & Removal
• High Quality Plastic with Maximum UV Protection
• Recommended Operating Pressure: 10 to 30 PSI
• Maximum Operating Pressure: 70 PSI
• Allowable Tubing Wall Thickness: .025” -.050”
• Allowable Tubing Inside Diameter: .590” - .630”

Product Details

• Direct-Loc Tee with 3/4" Slip
• Fits both 1/2" .700 OD Poly Tubing & 1/2" .710 OD Poly Tubing
• Reusable – Just unscrew Direct Loc ends
• Quick & Easy Installation & Removal
• High Quality Plastic with Maximum UV Protection
• Recommended Operating Pressure: 10 to 30 PSI
• Maximum Operating Pressure: 70 PSI
• Allowable Tubing Wall Thickness: .025” -.050”
• Allowable Tubing Inside Diameter: .590” - .630”

Replacement for

Dripworks Easy Loc EL345SOCT, , Irritec A1-HT66P3/4, , Point Source Irrigation Perma-Loc 31-HT66P3/4