In observance of Memorial Day, we will be closed on Monday, May 27th. All orders placed after 3pm PST on Friday, May 24th will be shipped on Tuesday, May 28th - Thank You!
Note: This filter has HOSE THREADS.
This Y filter is installed between the vacuum breaker and pressure regulator and protects drip emitters from rust, sand and other impurities that may clog them. The stainless steel screen is easily removed for cleaning by unscrewing the threaded cap. Drip emitters are less likely to clog if you install proper filtration.
How to Install a Drip Irrigation Hose Thread Y Filter
Irrigation Direct Product Tutorial
Y Hose Filter: DD-YS75HFM
The Y Hose Filter from Irrigation Direct is used with Drip Irrigation and is installed between the hose vacuum breaker and the pressure regulator. It helps to protect drip emitters, drippers and soaker hose drip line from rust, sand and other impurities that may clog them. It has a 3/4" female hose swivel inlet and a 3/4" male hose thread outlet.
It comes with an internal 150 mesh stainless steel screen and is easily removed for cleaning. Drip systems are less likely to clog if you install proper filtration.
For larger systems with irrigation valves, use our Y filters with pipe threads and be sure the filter is installed on the downstream side of the valve assembly.
As with all hose threads, no Teflon tape is required. A standard hose washer is used to make a water tight seal.
Installing a Y hose filter is quick and easy.
Simply screw the Y hose filter onto your desired water source below the previously installed hose vacuum breaker. Hand tighten to make a water tight seal.
To clean the internal filter screen, simply unscrew the cap from the filter body and remove the filter.
Inspect the screen for any pitting, holes or damage to the filter and clean with a small nylon brush and water. Replacement screens are available if needed DD-YSRS.
The YS75HFM Y Hose Filter is just one in a full line of professional irrigation product available from Irrigation Direct.
- Inlet: 3/4" FHT (Female Hose Thread)
- Outllet: 3/4" MHT (Male Hose Thread)
- For use with hose threaded products only.
- Stainless Steel 150 Mesh Screen
- Heavy duty plastic with maximum UV & oxidizer protection
- Operating Pressure: Up to 120 PSI
- Not recommended to be installed under static (constant) pressure
- Recommended Flow Rate: Up to 12 GPM (gallons per minute) or 720 GPH
- Should be installed after a manual or electric valve
- Should be installed before pressure regulator
- Replacement screens available:
- O-Ring Kit available
DIG P09-155 P14-155Drip Depot 1025Dripworks FYHL155MrDrip P09-155Sprinkler Warehouse P09-155 The Drip Store F300
Drip Pressure Regulator - reduces household water pressure.
Swivel Adapter - connects hose threads to size 700 drip tubing.
Hose End Digital Timer (hose threads). Battery powered hose end irrigation timer with LCD display.
Hose Vacuum Breaker (hose threads). Prevents back flow into household water supply.
You may also be interested in the following product(s)
$3.90 - $7.50
$2.50 - $3.00