Keep drip tubing in place with these 8" long wire stakes.
How To Install a Tubing Hold Down Wire Stake for 1/2" & 3/4" Tubing
Irrigation Direct Product Tutorial
Tubing Hold Down Wire Stake – S8
The tubing hold down stake from Irrigation Direct is used with drip irrigation to hold both ½” and ¾” drip tubing in place.
It’s 8 inches in length and made from corrosion-resistant steel
Installing a hold stake is easy.
Simply layout your drip tubing and place the stake base next to the tubing. Then push the stake down into the soil. Be sure the stakes clip sits over the tubing.
The hold down wire stake is excellent for heavy soils, But when installing, putting too much force on the stake could cause it to bend.
If the stake won’t push all the way down, it may be clipped to make it shorter and easier to install.
When installating in softer soils, use our tubing hold down plastic stake.
The S8 tubing hold down wire stake is just one in a full line of professional irrigation products available from Irrigation Direct
- Secure 1/8" to 3/4" drip tubing
- Made with corrosion-resistant steel
- Excellent in heavy soils
- Also available: 6" plastic hold downs & 6" micro tubing stakes
Ag Products S7 Agrifim S 8 Aquarius Brands S7 Dripworks SBHD Ewing 12001597Jain Irrigation S7 MrDrip R61B Orbit DripMaster 1/2" Loop Stake 61442P 65731 66731 Pepco S7 Raindrip R397CT R397CB 397010B 397015B 397025BSprinkler Warehouse 16-056The Drip Store S008Toro T-SS6-50
1/2" or 3/4"
You may also be interested in the following product(s)