Micro Tubing Holder Stake 6" - Multiple sizes .167" to .350" OD

Product Description

Keep drip emitters and micro tubing in place with these 6" long plastic stakes.  Emitter and micro tubing is elevated, reducing dirt and insect intrusion.

How To Install a Micro Tubing Holder Stake for 1/4" Tubing

Video Transcript

Product Details

• Use near plants, in flower pots, and garden boxes.
• Holds 1/8" & 1/4" tubing in place
• Overall Length: 6"
• High Quality Strong Plastic with Maximum UV Protection

Replacement for

Acu-Drip A160 Feeder Tubing Support Stake, , Ag Products S-2, , Agrifim S 6, , Aquarius Brands S-2, , DIG 16-016 "V" Stake, , Drip Depot 1154, , DripKing S6, , Dripworks SS6, , Ewing 12001595, , Hit RPS 6, , Jain Irrigation S-2, , MrDrip 16016, , Orbit DripMaster Tubing Holder Stake 65721 66721, , Pepco S-2, , Rain Bird 1/4" Tubing Stake TS025, , Raindrip R381CT R381CB A381CB 381010B 381025B 381050B, , Salco SLV-DTS-20-400B, , Sprinkler Warehouse 16-016, , The Drip Store S003, , Toro Blue Stripe 53637 T-IPS0104, , Weathermatic SLV-DTS-20-400B, ,

Related Tutorials

• What Size Is My Drip Tubing?
    Tip: Check compression ring color

Tips & Tricks

Fix Big Holes With a Coupler

If a goof plug won't do the trick

If you have a hole in a mainline poly pipe that is bigger than a goof plug, a compression coupling is the fitting to use. Make a clean cut and insert the two tubes into each end of the coupler. No glue required.

Videos

Deluxe Hand Punch - HP250

Goof Plug - GP

Tubing Hold Down Plastic Stake - S1

Tubing Hold Down Wire Stake - S8

FAQ

How do I determine my water flow rate?

The flow rate is the amount of water flowing through your water supply line. Since drip emitters and micro sprays consume x gallons per hour, it is important to know the flow rate available to feed your emitters. It is measured in gallons per hour (GPH). To determine the flow rate out of your faucet (hose bibb, spigot, hydrant), read our tutorial on Determing Your Flow Rate.