Keep 1/2" & 3/4" drip tubing in place with these 6" long plastic stakes.
How To Install a Tubing Hold Down Plastic Stake for 1/2" & 3/4" Tubing
Irrigation Direct Product Tutorial
Tubing Hold Down Plastic Stake – S1
The tubing hold down stake from Irrigation Direct is used with drip irrigation to hold both ½” and ¾” drip tubing in place.
It’s 6 inches in length and made from quality plastic with UV inhibitors for maximum protection.
Its flat top can be hammered to help with installing the stake in the soil.
Installing a hold stake is easy.
Simply layout your drip tubing and place the stake base next to the tubing. Then push the stake down into the soil. A hammer may be used to help if the soil is hard. Be sure the stakes clip sits over the tubing.
The hold down stake is designed to be used in loam or light soils. When installing in harder soils, putting too much force on the stake could cause it to break.
When installation in harder soils, use our wire stake.
The S1 tubing hold down plastic stake is just one in a full line of professional irrigation products available from Irrigation Direct.
- Best way to secure 1/2" & 3/4" drip poly tubing
- Hiqh Quality Plastic with Maximum UV Protection
- Flat top to hammer into soil
- 6" in lenght
- Use in loamy, light soils
- Also available: 8" wire stakes & 6" micro tubing stakes
Acu-Drip A170 Main Line Stake Ag Products S-4 Agrifim S 7 Aquarius Brands S-4 DIG 16-011 Drip Depot 1417 Dripworks SPLHD Ewing 12001594 Hit RPS 7 Jain Irrigation S-4 MrDrip 129 Pepco S-4 Raindrip R398CT R398CB 39800UB Salco SLV-43615Sprinkler Warehouse 16-011The Drip Store S006 Toro Blue Stripe 53620 T-IPS1500Weathermatic SLV-43615
You may also be interested in the following product(s)