3/4" Female Hose Swivel x 3/4" & 1/2" Female Slip Adapter

Product Description

This swivel fitting glues onto the end of a 1/2" PVC pipe or into a 3/4" PVC fitting. Connects hose bibb, faucet, spigot, hydrant, garden hose or hose thread parts (like drip filters and regulators) to 1/2" PVC pipe or 3/4" PVC fittings.

Product Details

• Constructed of high quality Schedule 40 PVC
• Garden hose thread and pipe slip connection
• 3/4" female hose thread swivel by 1/2" & 3/4" slip
  
• Glues onto 1/2" PVC pipe or into 3/4" slip fitting
  
• Slip end requires PVC glue
• Hose Washer included

Product Details

• Constructed of high quality Schedule 40 PVC
• Garden hose thread and pipe slip connection
• 3/4" female hose thread swivel by 1/2" & 3/4" slip
  
• Glues onto 1/2" PVC pipe or into 3/4" slip fitting
  
• Slip end requires PVC glue
• Hose Washer included

Replacement for

Ag Products 3/4-FHS-1-WW, , Aquarius Brands 3/4-FHS-1-WW, , Dripworks AFHI, , Jain Irrigation 3/4-FHS-1-WW, , Pepco 3/4-FHS-1-WW, ,

Related Tutorials

• Connecting to the Water Source
    Hose Bibb vs. Electric Solenoid Valve
• Home Drip Irrigation System Design and Installation Guide - Micro Irrigation Systems
    Everything you need to know about Drip Irrigation Systems
• Retrofitting Sprinklers for Drip Irrigation

Tips & Tricks

Use Teflon tape on pipe threads

For a water-tight seal

Always use Teflon tape with pipe-threaded fittings. Wrap Teflon tape clockwise 4 - 5 times around pipe threads. Hose-thread fittings use a hose washer to make a water-tight seal.

Check hose washers on hose-thread fittings

To ensure water-tight seal

Over time, hose washers can compress or deteriorate, causing fittings to leak. Check garden hoses and fittings for a flexible hose washer. Replace brittle or worn washers. Insert a hose filter washer for a little added filtration in your hose or drip poly tubing. If the fitting still leaks, try adding a second washer. For pipe threads, use Teflon tape.

Hose Thread

Officially called "Garden Hose Thread" (GHT), hose threads are found on garden hoses and many irrigation parts and adapter fittings. Generally referred to as "3/4" hose threads" the outer diameter is 1.0625 inches and has a pitch of 11.5 tpi (threads per inch). Hose threads are NOT the same as pipe threads and should never be screwed into pipe threaded fittings.   

Male hose threads are found on the outside of a fitting and thread into female hose threads.

Female hose threads are found on the inside of a fitting and accept male hose threads.

Hose threads do not require Teflon tape or pipe dope (like pipe threads), just a hose washer. If you find a water leak with hose threads, it is most likely a worn hose washer. It may be time to replace it. Hose washers are found inside fittings with female hose threads. See also Pipe Thread, Adapter, Swivel, Hose Washer, Teflon Tape

Pipe Thread

The common term for National Pipe Thread (NPT). Pipe threads require Teflon tape or pipe dope to create a water-tight seal. Do not thread together pipe threads and hose threads. See also Teflon Tape, Pipe Dope, Hose Thread.

Teflon Tape

A non-adhesive tape (made of Teflon non-stick material) that is used to create a water-tight seal with pipe threaded fittings. It is tightly wrapped in a clockwise motion 3-4 times around the male pipe threads. Male and female fittings are then threaded together.

Hose Washer

Rubber gasket found inside fittings with female hose threads that makes a water-tight seal. See also Hose Thread.

View our complete glossary of irrigation terms.