Hose thread ball valves are used to shut off individual water lines. Connect to 3/4" hose bibb, faucet, spigot, or hose end.
How to Install a Drip Irrigation Hose Thread Ball Valve
Irrigation Direct Product Tutorial
¾” In Line Hose Thread Ball Valve: DD-BV75
The In Line Hose Thread Ball Valve from Irrigation Direct is used with drip irrigation to shut off or control the flow of individual water lines. It can be attached to a hose bibb, faucet, spigot or at the end of a garden hose.
It has a ¾” female hose thread inlet and ¾” male hose thread outlet.
As with all hose threads, no Teflon tape is required. A standard hose washer is used to make a water tight seal.
Installing an in line hose thread ball valve is quick and easy.
Simply screw the ball valve onto the desired water source you need to control. Hand tighten the ball valve to make a water tight seal.
To operate, simply move the control lever to the desired position. When the lever is in line, the ball valve is fully opened. When the lever is parallel, the ball valve is fully closed.
The flow of water can be controlled by moving the lever back and forth.
The BV75 In Line Hose Thread Ball Valve is just one in a full line of professional irrigation product available from Irrigation Direct.
- Inlet: 3/4" FHT (Female Hose Thread)
- Outlet: 3/4" MHT (Male Hose Thread)
- Hose Washer included
- Minimum Operating Pressure: 10 psi
Note: Not designed for low pressure or gravity feed systems
Ag Products 3/4GY 3/4GBAgrifim BV 75 Aquarius Brands 3/4GY DIG 28-018 Shut Off Valve Drip Depot 1229, Dripworks HSO Ewing 12000360 Hit RPBV 75 Jain Irrigation 3/4GY 3/4GB Pepco 3/4GY Raindrip 61500UB The Drip Store A020
You may also be interested in the following product(s)
$23.90 - $28.90
$1.44 - $2.28
$1.08 - $1.92