Related Products
-
Micro Tubing Holder Stake 6" - Multiple sizes .167" to .350" OD
$0.08 - $0.17Volume discounts 1 - 49 $0.17 50 - 99 $0.15 100 - 999 $0.11 1000 + $0.08 -
-
1/2" x 7" Poly Cut-off Riser Extender 1/2" Male Pipe Thread x 1/2" Female Pipe Thread
$0.22 - $0.32Volume discounts 1 - 49 $0.32 50 - 499 $0.28 500 + $0.22 -
-
1/4" x 1,000' Poly Micro Tubing (PE) - 1,000' Roll
$42.50 - $44.50Volume discounts 1 - 4 $44.50 5 + $42.50 -
1/4" x 100' Vinyl Micro Tubing (PVC) - 100' Roll
$6.00 - $6.50Volume discounts 1 - 4 $6.50 5 + $6.00 -
1/4" x 1,000' Vinyl Micro Tubing (PVC) - 1,000' Roll
$49.50 - $52.00Volume discounts 1 - 2 $52.00 3 + $49.50 -
-
Goof Plug - Dual End 1/4" & 1/8"
$0.02 - $0.06Volume discounts 1 - 49 $0.06 50 - 99 $0.05 100 - 999 $0.04 1000 - 9999 $0.03 10000 + $0.02 -
1/4" x 100' Soaker Hose Dripline 6" Spacing 1/2 GPH Dripline Irrigation Emitters - Black Tubing
$15.50 - $19.90Volume discounts 1 - 4 $19.90 5 - 9 $17.50 10 + $15.50 -
1/4" Bug Plug for 1/4" Micro Tubing
$0.04 - $0.08Volume discounts 1 - 49 $0.08 50 - 199 $0.07 200 - 999 $0.06 1000 + $0.04 -
1/4" x 100' Soaker Hose Dripline 12" Spacing 1/2 GPH Dripline Irrigation Emitters - Black Tubing
$12.50 - $14.90Volume discounts 1 - 4 $14.90 5 - 9 $13.90 10 + $12.50 -
6 GPH per outlet - Pressure Compensating Bubbler - 1/2" FPT Inlet x 6 - 1/4" Outlets
$1.40 - $2.00Volume discounts 1 - 24 $2.00 25 - 99 $1.80 100 - 499 $1.60 500 + $1.40 -
10 GPH per outlet - Pressure Compensating Bubbler - 1/2" FPT Inlet x 6 - 1/4" Outlets
$1.40 - $2.00Volume discounts 1 - 24 $2.00 25 - 99 $1.80 100 - 499 $1.60 500 + $1.40
Product Description
Great for converting existing sprinkler systems to drip irrigation products. Up to 6 outlets available. Ships with one outlet open. Cut the tip off of outlets as you need them. Not sure which type of emitter to buy? Compare all drip emitters.
Product Details
- Adjustable from 1 to 6 - 1/4" (.250) outlets, comes with one outlet open
- Easily open additional outlets with utility knife (see Expert Advice Tab)
- Recommended Operating Pressure: 10 - 40 PSI
- Screen included
- Each outlet will put out 20 GPH (gallons per hour)
- To install unit on its side simply use a 1/2" marlex elbow
- Due to tubing softness, it is not recommended to use 1/4" Poly Vinyl tubing (PVC). Use 1/4" PolyEthylene tubing (PE) instead.
Installation Tip:
Use a utility knife to open bubbler outlets
Use only the outlets you need.
STEP ONE: Cut off the outlet tip.
It may be safer to screw the bubbler onto a 1/2" threaded riser for cutting.
-
Hold the bubbler against a hard surface and away from your body.
-
Place the blade against the outlet that you want to open.
-
Wiggle the blade back-and-forth while applying firm pressure.
STEP TWO: The tip of the outlet will cut off cleanly and is now ready for 1/4" drip tubing.
Product Details
- Adjustable from 1 to 6 - 1/4" (.250) outlets, comes with one outlet open
- Easily open additional outlets with utility knife (see Expert Advice Tab)
- Recommended Operating Pressure: 10 - 40 PSI
- Screen included
- Each outlet will put out 20 GPH (gallons per hour)
- To install unit on its side simply use a 1/2" marlex elbow
- Due to tubing softness, it is not recommended to use 1/4" Poly Vinyl tubing (PVC). Use 1/4" PolyEthylene tubing (PE) instead.
Replacement for
Agrifim CF 20 Cuatro-Flo Bubbler, , Drip Depot 1143,, , Hit RPCFL 20, , Raindrip Multiplex Bubbler, ,
1/4" Drip Micro Tubing is attached to outlets and distruibutes water to individual plants.
6-Outlet Pressure Compensating Bubbler screwed onto a Marlex Elbow
1/2" marlex elbow attached to a 1/2" Cut Off Riser
