Related Products
-
1/2" Glue-in Compression Adapter .700 OD x 1/2" PVC Male Slip - Black Ring
$0.08 - $0.20Volume discounts 1 - 49 $0.20 50 - 99 $0.15 100 - 999 $0.10 1000 + $0.08 -
1/2" Glue-in Compression Adapter .455 OD Compression Adapter - Red Ring
$0.15 - $0.25Volume discounts 1 - 49 $0.25 50 - 99 $0.20 100 + $0.15 -
1/2" Glue-in Compression Adapter .620 OD x 1/2" PVC Male Slip - Green Ring
$0.08 - $0.20Volume discounts 1 - 49 $0.20 50 - 99 $0.15 100 - 999 $0.10 1000 + $0.08 -
.710 Glue-in Compression Adapter x 1/2" PVC Male Slip - Blue Ring
$0.08 - $0.20Volume discounts 1 - 49 $0.20 50 - 99 $0.15 100 - 999 $0.10 1000 + $0.08 -
.700 x .580 OD Compression Reducing Coupling
$0.50 - $0.65Volume discounts 1 - 24 $0.65 25 - 99 $0.55 100 + $0.50
Product Description
A compression adapter allows you to convert a 1/2" PVC slip fitting to a drip tubing compression fitting. This compression adapter fitting is glued into a 1/2" PVC elbow, coupling, or tee and converts it to a 580 drip tubing compression fitting.
Great for sprinkler-to-drip retrofit projects. Install a drip regulator and filter near your sprinkler system valve. Connect it to the existing PVC pipe. Cap off sprinklers and add compression adapters to your existing PCV pipe out in the field. Run drip mainline from there.
Product Details
- Yellow rings indicate 580 fittings (for drip tubing with .580" OD)
- Convert from 1/2" Female Slip PVC Fitting to 580 Tubing Compression Fitting (.580" Tubing)
- Glues into any 1/2" Female Slip PVC Fitting
- With all of the PVC Fittings available on the market this gives you unlimited possibilities for connecting your Drip Irrigation System to any existing Irrigation System
- Use with any PVC Glue
- Maximum UV Protection
Installation
Step 1: Glue PVC Fitting
Put a small amount of PVC glue in the inside of the 1/2" PVC slip fitting (tee shown)
Step 2: Glue Compression Adapter
Put a small amount of PVC glue in the outside of the compression adapter
Step 3: Assemble PVC Fitting and Adapter
Firmly press compression adapter into 1/2" PVC fitting.
Do it quickly before the glue sets.
Push until it bottoms out.
Step 4: Install Drip Tubing
Your PVC fitting is now ready to accept the drip tubing.
Simply push the drip tubing into the compression adapter.
Product Details
- Yellow rings indicate 580 fittings (for drip tubing with .580" OD)
- Convert from 1/2" Female Slip PVC Fitting to 580 Tubing Compression Fitting (.580" Tubing)
- Glues into any 1/2" Female Slip PVC Fitting
- With all of the PVC Fittings available on the market this gives you unlimited possibilities for connecting your Drip Irrigation System to any existing Irrigation System
- Use with any PVC Glue
- Maximum UV Protection
Replacement for
Agrifim CA 580 Hit RPCA 580 MrDrip 140
