Adjustable Umbrella Pattern Sprayer Full Circle on 6" Stake for Drip Irrigation

Product Description

Drip Irrigation Umbrella Pattern Sprayer is adjustable up to a diameter of 5.5 feet. The 6" stake contains a 1/4" connector that can be broken off and used with 1/2" drip tubing. The top is easily removed for cleaning. Not sure which type of emitter to buy? Compare all drip emitters.

SM360S Drip Irrigation Full Circle Spectrum Sprayer Installed and Watering

Video Transcript

Product Details

• Drip Irrigation Adjustable Umbrella Pattern Sprayer
• Spike Length 6"
• 1/4" (250) transfer barb Included
• Operating pressure: 15 - 30 PSI
• Flow rate: 0 to 24 GPH
• Diameter: up to 5.5 feet

Compare all drip emitters.

Replacement for

Acu-Drip B210 Fan Spray Bubbler on a Stake, , Ag Products PVSV360T Umbrella Sprayer 360 Vortex Sprayer on a Stick, , Agrifim DAFS FAN Fan Spray adjustable DIAL-A-FLO emitter 6" stake, , Aquarius Brands PVSV360T Umbrella Pattern Sprayer 360 Vortex Sprayer on a Stick, , DIG 06-005 Adjustable Spray Jet 360 on a 6" stake, , Drip Depot 1167, , DripKing DAFSFAN, , Dripworks MSPS, , Ewing 12001674, , Hit RPDAFS FAN Dial-A-Pro, , Hunter Halo-Spray HS-B-STK, , Jain Irrigation PVSV360T 360 Vortex Sprayer on a Stick, , Pepco PVSV360T Umbrella Pattern 360 Vortex Sprayer on a Stick, , Rain Bird XERI-BUBBLER UXB360SPYK, , Raindrip Full Circle Fan Spray Bubbler on Stake R153CT R153CB 153005B 15300UB, , Sprinkler Warehouse 07-005, ,

Related Tutorials

• What Size Is My Drip Tubing?
    Tip: Check compression ring color
• Installing Micro Spray Caps with a Nut Driver
    Use a 5/16" nut driver

Tips & Tricks

A Paper Clip Quickly Cleans a Hole Punch

Insert the wire to clear the tool

A good hole punch will actually cut a tiny circle out of the drip tubing. The plug of tubing can be removed from the cutting edge of the punch with a paper clip. Push it through the cutting end to clear any plastic debris.

Fix Little Holes With a Goof Plug

Doubles as a 1/4" end plug

If you make a mistake and poke a hole in the wrong place on a drip line, insert a goof plug (small barb). If the hole gets worn and leaks a little, pull the plug out and use the large barbed end. Goof plus are also used to plug the end of 1/4" micro tubing.

Determine Your Soil Type Before Selecting A Drip Emitter

Clay, Loam, Sand

Soil type influences water penetration and runoff. If soil particles are tightly packed (clay soil), water can pool on the surface and eventually flow away from the plants. Water flows quickly through sandy soils. Select low output emitters (1/2gph, 1gph) for clay soil and higher output (2gph, 4gph) for sandy soils. View "Choosing the right Drip Emitter".

Videos

1/4" Barbed Elbow - L250

Deluxe Hand Punch - HP250

Goof Plug - GP

Full Circle Stream Spray Bubbler - SR360S

FAQ

How do I determine my water flow rate?

The flow rate is the amount of water flowing through your water supply line. Since drip emitters and micro sprays consume x gallons per hour, it is important to know the flow rate available to feed your emitters. It is measured in gallons per hour (GPH). To determine the flow rate out of your faucet (hose bibb, spigot, hydrant), read our tutorial on Determing Your Flow Rate.

How do I add on to my existing drip system?

We have a great selection of drip tubing coupling adapters for varying sizes of drip tubing. They are color coded. The first step is to determine the Outer Diameter (OD) of your tubing.  

Common OD dimensions are:

.700 inches (called “700") Black fittings - 700 Compression Coupler
.620 inches (called “620”) Green-ringed fittings - 700 x 620 Compression Adapter
.710 inches (called “710”) Blue-ringed fittings - 700 x 710 Compression Adapter
.580 inches (called “580”) Yellow-ringed fittings - 700 x 580 Compression Adapter
.455 inches called "455") Red-ringed fittings - 700 x 455 Compression Adapter

If you find that your existing tubing is not 700, simply add the appropriate coupling adapter to your order to go from your tubing to 700.

View our Installing Drip Tubing & Fittings tutorial for more details. 

Buy 700 tubing here.

Can I combine emitters (drippers) and micro sprays on the same line?

You can combine drip emitters, adjustable drip sprayers, and drip micro sprays all on the same poly tubing (mainline) as long as your total gallon output does not exceed the flow rate available. Drip sprayers can use in excess of 30 gallons per hour so keep track of your water output when designing your drip system. For more details, check out these tutorials:

 

Choosing The Right Drip Emitter

How Many Emitters Can I Put On a Mainline?.

Micro Sprinkler

Micro sprinklers (also called Rotary Micro Sprayers or Spinners) are a rotating mini sprinkler that is installed on drip tubing. They operate at low pressure (20 psi is ideal), and can cover an area up to 15 feet in diameter. See also Micro Spray.

View our complete glossary of irrigation terms.