Note: 620 size (Raindrip) SOLID tubing. No holes or emitters in tubing. This is NOT soaker hose.
For main and lateral lines of a drip irrigation system. Use Raindrip compression fittings (Raindrip - 620 series). The maximum distance that you can run drip tubing will vary with the number of emitters you install and the spacing between emitters.
How To Install 620 Series Solid Poly Drip Tubing
Irrigation Direct Product Tutorial
620 Series Raindrip Solid Poly Tubing – DD-DH620
The 620 series Raindrip solid poly tubing from Irrigation Direct is used with drip irrigation for main and lateral water lines and is a direct replacement for Raindrip poly tubing. It has a .620 outside diameter and a .520 inside diameter giving the tubing a .050 wall thickness.
Because of its softness, drip poly tubing is not meant to be buried. If buried, the tubing may compress and reduce or cut off the flow of water. Vermin such and gophers and moles are known to chew poly tubing that has been buried.
If you need to bury your drip poly tubing, it’s best to sleeve the buried length with rigid PVC tubing.
Its operating pressure is 10 - to 60 psi with its optimal pressure being 30 psi. Its maximum flow rate is 180 gallons per hour. It’s manufactured from high quality polyethylene resigns and UV inhibitors. With proper care and maintenance, poly tubing can last for up to 8 years. Mulching over tubing will extend the tubing’s life.
The 620 series tubing uses the 620 series of compression fittings.
Before Installing, it’s best to let your drip tubing sit in the sun for at least 30 minutes. This softens the tubing and allows it to unroll for easier installation.
When unrolling the tubing, start by using a tubing holder stake or heavy object to keep the tubing in place. Then unroll the tubing as you would roll a tire. This helps to help keep the tubing from spiraling and causing kinks.
Once unrolled, use tubing holder stakes at 5 to 10 foot intervals to secure the tubing in place.
Now your tubing is ready for Drip Emitters or Micro Sprays.
The 620 series solid poly tubing is just one of many professional irrigation products available from Irrigation Direct.
- 500 foot roll
- .520" Inside Diameter & .620" Outside Diameter
- Use Raindrip 620 Series Compression fittings with this tubing.
- Do not use 700, 710, or Direct-Loc fittings.
- Operating Pressure: 10 - 60 PSI
- Recommended Pressure: 30 PSI
- High Quality PE (Polyethylene) Drip Tubing
- Manufactured with Finger Print PE Resin
- Blank Black Drip Tubing for Professional Installation
- Maximum Flow Rate per Circuit: 180 GPH (Gallons Per Hour)
Raindrip 1/2" Poly Drip Watering HoseRaindrip 0520501/2” Tubing.620 OD Tubing1/2” Poly Tubing1/2” Polyethylene TubingIrrigation TubingDrip HoseDrip Irrigation HoseDrip Irrigation TubingDrip PipeThe Drip Store 1/2" .620 OD Poly TubingThe Drip Store T103
You may also be interested in the following product(s)
$0.40 - $0.80
$0.90 - $1.60